Menene Injinan Ake Amfani da su wajen Samar da Ƙofofi da tagogi?

Menene Injinan Ake Amfani da su wajen Samar da Ƙofofi da tagogi

1. Injin Yanke

1. Ana amfani da shi don yankan bayanin martaba na UPVC a 45,90° tare da igiyoyin gani guda ko biyu.
2. Matsin iska yana motsa ciyarwa da dannawa, kuma ana iya daidaita saurin.
3. Yana da fasalulluka na aiki mai sauƙi da madaidaicin yankan.
4. Tebur mai aiki yana motsawa cikin sauƙi, kuma ana iya kasancewa a wurin da kuke buƙata.

2. Na'urar Welding mara kyau

1. Ana amfani da shi don walda bayanan martaba masu launi (fim ɗin da aka lanƙwara, haɗin haɗin launi, bayanan martaba da sauransu).
2. Yana iya tsaftace kusurwar walda sama da ƙasa a lokaci ɗaya.
3. Tsarin na'ura yana da sauƙi da haske, yana da sauƙin aiki kuma yana da daidaitattun daidaito.
4. PLC iko, pneumatic drive, sauki aiki, barga iyawa.
5. Kawuna biyu na iya aiki a lokaci ɗaya, ɗaiɗaiku kuma a hade.

3.Glazing Bead Yankan Gani

1. An yi amfani da shi don 45 digiri glazing bead profile.
2. Biyu glazing beads yankan a lokaci guda.
3. Guda 4 ganga yana tabbatar da yankan daidai, yanke sau biyu kowane ƙarshen don niƙa ƙafar ƙugiya.
4. Na'urar matsawa ta tsaye da ƙirar yankan jig na musamman suna tabbatar da tsayayyen matsayi.

4. V Injin Yankan

1. An yi amfani da shi don yankan tsagi mai siffar Vc profile.
2. Daidaitacce zurfin V-notch dangane da bayanin martaba daban-daban.
3. Daidaitaccen saurin ciyarwa.
4. Ana yanke siffa ta atomatik na zato guda biyu.
5. Biyu gani ruwa a kan daban-daban mota guda biyu gyarawa a 45 digiri ba tare da giciye.
6. Matsayin sanda na jagora.

5. Ruwa Ramin Milling Machine

1. Niƙa kowane irin ramummuka na ruwa da ma'aunin ma'aunin iska.
2. Tsarin ciyarwa na musamman, ba buƙatar kulawa ta musamman, babban ingancin niƙa.
3. Tsawon rami mai niƙa tsakanin 60mm yana daidaitacce kuma kewayon amfaninsa yana da faɗi.
4. Shugabannin niƙa guda biyu na iya yin aiki tare don biyan buƙatun sarrafawa iri-iri.

6. Kwafi na'ura mai ba da hanya tsakanin hanyoyin sadarwa da Kulle Ramin hakowa

1. Ana amfani da shi don sarrafa kwafi-kwafi daban-daban na ramuka, ramuka da ramukan ruwa.
2. Yana da fasalulluka na ƙaƙƙarfan tsari da ƙaramin ƙara;karfin iska yana tafiyar da matsewa.
3. Yana iya cimma ci gaba da kwafin-kwafi da niƙa, aiki mai sauƙi da aminci.
4. Yin amfani da canjin ƙafa yana sarrafa silinda mai latsawa, aminci kuma abin dogaro.

7. UPVC Profiles lankwasawa Machine

1. Ana amfani da shi don sarrafa baka PVC taga.
2. Cikakken lankwasawa forming tare da diamita 650-1800mm.
3. Ɗauki dumama infrared, wanda zai iya sa bayanin martaba ya zama mai zafi cikin sauƙi.
4. Bukatar samfurin bayanan martaba don yin mold tare da farashi kusan $ 450 ga kowane saiti.